Pallet Size Guide

A guide to standard and custom pallet dimensions

Request Custom Size Pallets

Canadian or US number, 10 digits
Address
Canadian postal code or US ZIP code

How It Works

Tell Us What You Need

Buy, sell, recycle or repair: choose the service, the product, its condition and how many.

Get a Reply by Email

A partner supplier in our network follows up by email with a quote or the next step.

Pallets and Crates

Wood pallets, plastic pallets and wood crates, in standard or custom sizes.

Questions

Write to [email protected].

Standard Pallet Sizes

These are the most common pallet sizes used across North America and internationally. All measurements are Length x Width x Height (inches).

NameDimensionsWeightCommon Uses
GMA/Standard48" x 40" x 6"30-70 lbsMost common in North America, general freight
Euro Pallet47.2" x 31.5" x 6"40-55 lbsEuropean standard, international shipping
48" x 48"48" x 48" x 6"40-75 lbsDrums, bulk containers, square loads
40" x 48"40" x 48" x 6"35-70 lbsBeverage industry, telecommunications
42" x 42"42" x 42" x 6"35-65 lbsPaint, chemicals, telecommunications
48" x 45"48" x 45" x 6"35-70 lbsAutomotive industry
48" x 42"48" x 42" x 6"35-68 lbsRetail, consumer goods
40" x 40"40" x 40" x 6"30-60 lbsDairy products
36" x 36"36" x 36" x 6"25-50 lbsBeverage industry, small spaces
48" x 36"48" x 36" x 6"30-60 lbsBeverage six-packs, canned goods

Industry-Specific Pallet Sizes

Beverage Industry

  • 36" x 36" - Common size
  • 40" x 48" - Large volume
  • 48" x 36" - Six-pack cases

Designed for efficient stacking of bottles, cans, and kegs.

Telecommunications

  • 48" x 40" - Standard equipment
  • 42" x 42" - Cable reels

Optimized for electronic equipment and cable spools.

Automotive

  • 48" x 45" - Common size
  • 48" x 48" - Heavy parts

Heavy-duty construction for auto parts and assemblies.

Paint & Chemicals

  • 42" x 42" - Standard
  • 48" x 48" - Drums

Plastic pallets resist many chemicals; confirm compatibility with your products.

Dairy Products

  • 40" x 40" - Milk crates
  • 32" x 40" - Smaller loads

Confirm the requirements that apply to your products.

Retail & Consumer

  • 48" x 40" - Standard GMA
  • 48" x 42" - Oversized boxes

Optimized for retail distribution centers.

Weight Capacity Guide

Understanding pallet weight capacity is crucial for safe material handling. Capacities vary based on pallet construction, wood grade, and load distribution.

Static Load Capacity

When pallet is stationary

  • The highest of the three ratings
  • Typical 48x40 GMA wood: about 4,600 lbs
  • Block and heavy-duty pallets usually rate higher than standard stringer pallets
  • Plastic ratings vary widely by model

Note: Evenly distributed load on level surface

Dynamic Load Capacity

When pallet is being moved

  • Lower than the static rating
  • Typical 48x40 GMA wood: about 2,500 lbs
  • Depends on how the forks support the pallet
  • Check the rating of the specific pallet

Note: Load capacity when lifted by forklift

Racking Load Capacity

When stored on warehouse racks

  • Usually the lowest of the three ratings
  • Typical 48x40 GMA wood: about 1,500 lbs
  • Depends on the rack design and pallet orientation
  • Plastic pallets must be rated as rackable

Note: Supported at two points (stringers)

Important Safety Notes:

  • Always distribute loads evenly across the pallet surface
  • Never exceed the manufacturer's rated capacity
  • Inspect pallets regularly for damage or wear
  • Consider environmental factors (moisture, temperature)
  • Different grades (A, B, C) may have reduced capacities
  • Always follow your facility's material handling guidelines

Custom Pallet Dimensions

Don't see the size you need? Ask for custom pallets built to your specifications by partner suppliers.

Custom Size Options

  • Custom length
  • Custom width
  • Custom height
  • Special configurations
  • Multiple deck boards
  • Reinforced construction
  • Custom wood species

Why Custom Pallets?

  • Maximize container space
  • Reduce product damage
  • Improve warehouse efficiency
  • Accommodate unique products
  • Meet specific industry requirements
  • Optimize weight capacity
  • Streamline automation

Custom Order Process

  1. Submit dimensions & requirements
  2. Receive a quote by email from a partner supplier
  3. Review design specifications
  4. Approve prototype (if needed)
  5. Production begins
  6. Delivery or pickup arranged with the supplier

How to Measure Pallets

Pallet Terminology

Length: The longest dimension of the pallet, typically parallel to the stringers

Width: The shorter dimension, perpendicular to the stringers

Height: Total height from bottom to top deck surface

Stringer: The vertical boards running lengthwise that support the deck

Deck Board: The horizontal boards on top and bottom

Block: Square supports used instead of stringers (4-way entry)

Overhang: Deck boards extending beyond the stringers

Standard Conventions

  • Pallets are always measured Length x Width x Height
  • Measurements are typically in inches in North America
  • Length is listed first (e.g., 48x40 means 48" long, 40" wide)
  • Forklift entry is usually from the width side on 2-way entry pallets
  • Industry standards use nominal dimensions (may vary slightly)

International Pallet Standards

StandardDimensionsRegionNotes
GMA48" x 40"North AmericaMost common in Canada and the USA
EUR/EUR147.2" x 31.5"EuropeEuropean standard (1200mm x 800mm)
EUR247.2" x 39.4"Europe1200mm x 1000mm
EUR339.4" x 47.2"Europe1000mm x 1200mm, used in specific industries
EUR631.5" x 23.6"EuropeHalf-size Euro pallet (800mm x 600mm)
ISO 42" x 42"42" x 42"International1067mm x 1067mm, one of the ISO sizes
Australian Standard45.9" x 45.9"AustraliaSquare Australian pallet
Asian Standard43.3" x 43.3"AsiaCommon in Asian markets